Spínač, vypínač - Makita JS1600- držiteľ noža č.

Specifications Of The Transmitter:

Operating RF Frequency: 433MHz.

Coded System: 1527 Learning Code.

Working Voltage: DC 6V.

Working Current: 12mA.

Transmitting Power: 10mW.

Wireless Operating Distance: 50m(Free Space).

Transmission Rate: 50 ~ 60KHz.

Frequency Deviation: ±0.2MHz.

Color: Black.

Package Size: 6.2 * 2.9 * 1.2cm / 2.44 * 1.14 * 0.47in².

Package Weight: 34g/1.19oz.

Specifications Of The Receiver:

Input Power:AC90V-250V,

Maximum load: ≤10A,

Static current: 3.6 mA ~ 5.5mA,

RF Frequency:433MHz,

RF working mode:superheterodyne,

Receive sensitivity: >97dbm,

Transmitting distance:>50m ( open space),

Decoding mode:MCU software decoding,

Remote storage:25pcs,

Support remote type: 1527 Learning code, 2262 Fixed code(Rolling code can be design),

Working mode: Momentary, Toggle, Latching, Time delay (5s ,10s ,15s,20s ), Automatic energize when power on,

Wiring type:fixed terminal,

Dimension of PCB: 55*32*18mm (L,W,H),

Learning style: Learning Button,

Working temperature: -20 degrees 80 degrees,

Color: black,white.

Notice:

Different Options Include Different Packages.

About Working mode:

Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.

Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .

Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.

Time delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s or 20s, the relay disconnect automatically.

Automatic energize when power on: when power supply, the relay connects.

Clearing the code :

Push the learning button on the receivers for 9 times , until the LED indicator OFF and then flash,until it flash for 5 times. it mean the code have been cleared successfully;

After clearing the code, all the remote control can not work any more.

Learning the code :(momentary)

Push the learning key on the receiver once time , it comes into momentary setting mode .

Wait for a moment , the LED will be on, it comes into learning state .

Push the remote button , LED indicator on the receiver board will flash 3 times and then come off,

learning successfully .

Learning the code : ( Toggle )

Push the learning key on the receiver twice time , it comes into toggle setting mode

Wait for a moment , the LED will be on , it comes into learning state .

Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,

learning successfully .

Learning the code :( Latching )

Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.

For example : button A = ON , button B = OFF

Push the learning key on the receiver triple time , it comes into latching mode .

Wait for a moment , the LED indicator on the receiver board will be on,

Push the remote button A,

LED flash for 3 times .

Push the remote button B .

Led indicator flash for 3 times and then come off,

learning successfully.

A = ON , B = OFF .

Learning the code :( Time delay mode )

Push the learning key on the receiver forth time , the time dealy for 5 seconds .

Push the learning key on the receiver fifth time , the time delay for 10 seconds.

Push the learning key on the receiver sixth time , the time delay for 15 seconds .

Push the learning key on the receiver seventh time , the time delay for 20 seconds .The LED indicator will be on .Push the remote button , LED indicator flashes 3 times and then off, learning successfully .

Learning the code : (Automatic energize when power on)

Push the learning key on the receiver eight times , it comes into setting mode

Wait for a moment , the LED will be on , it comes into learning state .

Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,

learning successfully .

NOTE:

1.The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .

2. When you receive our products, it may set in one remote mode randomly, that because each product was tested before it can be arranged to shipment. So, please delete the existing data to first use.

3. After deleted the data, all the remote controls cannot work any more.

*If you do not understand clearly.Please send us a message to let us know.We will do our best to serve each of our customers.Enjoy your shopping!*

*We have our own factory.Please let us know if you have OEM projects.We are willing to negotiate with you.*

Is Smart Device : NO

Current : 10A

Material : Plastic

Remote Distance : Above 15 Meters for smart home

Features : 433Mhz RF Button Interrupter Touch Smart Lamp Lighting Wall Switch

Model Number : RF Remote Control 110V 220V Receiver Ceiling Lamp Switch

Switch Type : Remote Control

Warranty : 1 year warranty 1527 learning code smart home touch toggle switch DIY

Certification : CCC

Brand Name : Rubrum

Origin : Mainland China

Item Type : Switches

Certification : RoHS

Input Power : AC 85V - 250V

Encoding type : Intelligent 1527 2262 Learning Code

Quiescent Current : <5mA

Receiving Sensitivity : >97dbm

Modulation Mode : ASK

Working temperature : -30~ 80 degrees

RF working mode : superheterodyne

Maximum working current : <10A

Frequency : 433 MHz

Feature : Caring for the elderly, children, women, pregnant women

Application example 1 : Garage doors access control system

Application example 2 : Led Light Lamp Switch,Home Security Alarm System

Application example 3 : Home Security Alarm System,Car Sunroofs Control, Mando Garaje